Delem DA-65, Manual, Page: 100 / 239

Delem
V1101, 3.123
Parameter 123-130: Sequencer options
Range : 0000 - 1111
Default : 0000
Units : -
Function
To set general purpose sequencer option flags.
Description
You can set 4 flags per sequencer option parameter. Each flag can have the value 0 or 1.
- sequencer option flags
4..1 123 = 0000
- sequencer option flags 8..5 124 = 0000
- sequencer option flags 12..9 125 = 0000
- sequencer option flags 16..13 126 = 0000
- sequencer option flags 20..17 127 = 0000
- sequencer option flags 24..21 128 = 0000
- sequencer option flags 28..25 129 = 0000
- sequencer option flags 32..29 130 = 0000
To set option flag 1 and 2 you should program parameter 123 as 0011. Pay attention that you
count
from right to left . The lowest flag of each parameter is the most right digit.
These option flags are mapped on the flags 7664 - 7695. These flags have also been added to the
press.def file. Therefore with parameter 123 set to 0011 the flags 7664 and 7665 will be set to 1.
Variable Flag
M-OPTION1 7664
M-OPTION2 7665
... ...
M-OPTION32 7695
Note 1
If you are using the standard Delem sequencer and not creating your own sequencer, then these
parameters have no function.
Note 2
For more information about working with the sequencer file please refer to the sequencer
manual. This manual can be requested at Delem.