9.2.3 Running detection
The controller can be configured to receive engine running feedback from a variety of measurements.
More information
See
GENSET controller
,
GENSET controller principles
,
Running detection
for more information.
9.2.4 Regulation
The EMERGENCY genset controller regulates the engine governor (GOV) and can also regulate the generator AVR.
More information
See
Regulation
for more information.
9.2.5 Power management
The EMERGENCY genset controller works together with the other controllers in the system to provide efficient power management.
More information
See
Power management
for more information.
9.2.6 Load sharing
During
Harbour mode
, the EMERGENCY genset controller shares the load with other DEIF controllers using the DEIF network.
More information
See
Power management
,
Load sharing
for more information.
9.2.7 AC configuration
More information
The
AC configuration and nominal settings
chapter describes the AC configuration in general.
The following table shows how the general AC configuration description applies to the EMERGENCY genset controller.
Table 9.4
AC configuration for the EMERGENCY genset controller
EMERGENCY genset
General name
Generator
[Source]
Busbar
[Busbar]
9.2.8 Breaker configuration
More information
The
Breakers, synchronisation and de-loading
chapter describes breaker configuration in general. For the
EMERGENCY genset controller, replace "[Breaker]" with "Generator breaker" and "Tie breaker" in these descriptions.
9.3 Engine start
9.3.1 Engine start function
The controller software includes pre-programmed genset start sequences.
DESIGNER'S HANDBOOK 4189340911K UK
Page 325 of 521
