Datalogic AMT58 Series, Manual

Page: 377 / 435

AMT58x-DN DeviceNET®
37
4-7 Extended
Device
status
Bits are defined as follows:
0000 Self-Testing or Unknown
0 Firmware Update in Progress
0 At least one faulted I/O connection
0 No I/O connections established
0 Non-Volatile Configuration bad
0 Major Fault – either bit 10 or bit 11 is
true (1)
0 At least one I/O connection in run
mode
0 At least one I/O connection
established, all in idle mode
1 0 0 0
1 0 0 1 Reserved, shall be 0
1 0 1 0
…
1 1 1 1 Vendor/Product specific
8 Minor
Recoverable
fault
TRUE indicates the device detected a
problem with itself, which is thought to
be recoverable. The problem does not
cause the device to go into one of the
faulted states.
9 Minor
Unrecoverable
fault
TRUE indicates the device detected a
problem with itself, which is thought to
be unrecoverable. The problem does
not cause the device to go into one of
the faulted states.
10 Major
Recoverable
fault
TRUE indicates the device detected a
problem with itself, which caused the
device to go into the “Major
Recoverable Fault” state.
11 Major
Unrecoverable
fault
TRUE indicates the device detected a
problem with itself, which caused the
device to go into the “Major
Unrecoverable Fault” state.
12-15 Reserved Reserved, shall be 0
For any further information on status instance attribute refer to the
publication “The CIP Networks Library. Volume I. Common Industrial
Protocol (CIP™)”.
01-01-06 Serial number
[UDINT, ro]
This attribute is a number used in conjunction with the Vendor ID to
form a unique identifier for each device on any CIP network.
01-01-07 Product name
[SHORT_STRING, ro]
Default = 05 4C 49 4B 41 20h = “AMT58”