Datalogic AMT58 Series, Manual

Page: 273 / 435

ENCODER INFORMATION (PROFINET PARAMETERS)
INSTRUCTION MANUAL
93
Specific notes on using Internet Explorer
The following options must be set properly on Internet Explorer in order to get the
Encoder position and speed page to be continuously updated.
• Open the Settings menu;
• open the Internet Options property sheet;
• in the General tabbed page, press the Setting button available in the History
Browsing section;
• under Check for newer versions of stored pages, click Every time I visit the web -
page;
• press the OK button to confirm whenever requested.
ENCODER INFORMATION (PROFINET PARAMETERS)
Press the Encoder Information command in the left navigation bar of the Web server
Home page to enter the Encoder Information page. In this page the complete list of the
available Profinet parameters is displayed. Indexes are expressed in hexadecimal nota -
tion, values are expressed in either decimal notation or string format. The MAC address
of the connected encoder is shown under the name of the page.
Figure 4. Encoder information page
For a complete description of the available encoder parameters please refer to
Encoder
Parameters, starting on page 62
.
NOTE
Please note that the values shown in the Encoder Information page are
“frozen” in the moment when the page is displayed. To update the values
you must refresh the web page.