84
EXPERT 64EU rev.03
Transfer Menu
Memory card
Controller
Controller
Memory card
Press To Start Press To Exit
Press to select an item
14. MEMORY CARD
The memory card is used to create a backup
copy of your controller's configuration. The
card is also useful to transfer the configuration
of a controller to another controller of the same
type.
The switch at the bottom of the card is used
to lock or to unlock the card.
( = locked,
= unlocked).
1- Insert the memory card on the J10 con-
nector located at the bottom left corner
of the board. Position the components
towards the right hand side of the con-
troller as illustrated.
BE SURE TO TURN THE SYS-
TEM POWER OFF BEFORE
OPENING THE CONTROLLER’S
ENCLOSURE !
2- From the main menu, simultaneously press the
right and left-arrow keys for 3 seconds.
The following menu is displayed:
MEMORY CARD
CONTROLLER:
Simultaneously press the up and down-arrow
keys to start transferring the memory
card's content into the controller.
CONTROLLER
MEMORY CARD:
To save the controller's configuration into the memory card, press the down-
arrow key once to select the menu
"Controller
Memory Card" . Simulta-
neously press the up and down-arrow keys
to start transferring the
controller's configuration into the memory card.
3- Once the transfer is completed, simultaneously press the right and left-arrow
keys to exit the transfer menu. Remove the memory card from the
connector then lock the card ( ) if required.
J10
Summary of Contents for Integra EXPERT 64EU
