70
EXPERT 64EU rev.03
EXPERT 64EU
Number of Cycles:
Set the required number of cycles within the
selected light program. Adjustable from 1 to
6 cycles.
Display Settings:
Select the desired light cycle. All of the fol-
lowing parameters are related to this cycle:
Start Time:
Time at which the selected cycle starts.
Make sure the cycles do not overlap each
other.
Stop Time:
Time at which the light intensity starts de-
creasing (sunset).
Standard Intensity:
Regular light intensity during the cycles. Adjustable from 20 to 100%. It
must be set to a higher intensity than the minimum intensity value.
Use Light Peaks?:
Select "Yes" to activate the light peaks.
Peak Cycle:
Time that is required to perform a whole light peak cycle (see previous
graphic). The peaks’ cycle time must be even or greater than: peak duration
+ peak s peak sunset.
Peak Duration:
Delay within which the peak’s light intensity is maintained (see previous
graphic). Adjustable from 1 to 59 minutes.
Peak Intensity:
Light intensity of a peak. Adjustable from 20 to 100% and must be set to a
greater value than the standard light intensity.
Peak Sunrise / Sunset:
Rising and decreasing time of a light peak (see previous graphic). Adjustable
from 0 to 60 minutes.
Templates are available at the end of this manual to help planning the
light cycles.
Light Settings Program x
Day
24 days
Lights on 24 hours?
No
Minimum intensity
20 %
Sunrise
2 min
Sunset
2 min
Number of cycles
1
Display Settings
Cycle 1
Start Time
12:00A
Stop Time
12:00A
Standard Intensity
100 %
Use light peaks?
Yes
Peak Cycle
0:15 (h:m)
Peak Duration
1 min
Peak Intensity
80 %
Peak Sunrise
2 min
Peak Sunset
2 min
Exit: Press Back
Change: Press Modify
Press to Select an Item
Summary of Contents for Integra EXPERT 64EU
