Cumberland Integra EXPERT 64EU, User Manual

Page: 17 / 102

17
EXPERT 64EU rev.03
EXPERT 64EU
4.2 Password
This function allows to identify 2 different user types. It is used to restrict access to
certain functions of the controller. The password is made up of 4 digits. When a correct
password is entered, the current user is identified.
Installer Password:
The installer mode gives full access to all the
controller functions. The installer password can
be modified as explained below.
User Password:
The user mode gives access to the basic functions
of the controller. The controller automatically re-
turns to the user mode after 15 minutes of inac-
tivity. The user passwords cannot be modified.
Select
12. Controller Setup
4. Password
ENTERING A PASSWORD:
• Press the
Enter / Modify button then
use the up and down-arrow keys to
enter the first digit of the password.
Press the Enter / Modify button once
again to step to the next digit.
• Enter the 4 digits of the password then
press the Enter / Modify button once
again to validate. The user is then iden-
tified. The message “ Invalid password ”
is displayed if a wrong password is en-
tered.
CHANGING THE INSTALLER PASSWORD:
The installer password must first be entered as shown above to be modified.
The message “ Change Password ” is displayed when the current user is identi-
fied as the Installer. The new installer password can then be entered.
• Confirm the new installer password:
Once the new installer password is entered, the message “ Confirm Password ”
is displayed. Enter the new password once again to confirm the password.
Press the Enter / Modify button at the end to validate.
Main Menu
11. Alarm Log
12. Controller Setup
Controller Setup
4. Password
5. Relay Assignment
Password
Current User Installer
Change User * * * *
Change Password * * * *
Confirm Password * * * *
Exit: Press Back Change: Press Modify
Press to Select an Item
Default installer password
0 - 6 - 1 - 0
User 1 Password
1 - 1 - 1 - 1
User 2 Password
2 - 2 - 2 - 2