27
EXPERT 64EU rev.03
EXPERT 64EU
4.6.2 Making the Assignment
Templates are available at the end of this manual to
help with the relay assignment.
Select
12. Controller Setup
5. Relay Assignment*
Select desired type of output**
*
Only accessible from the installer mode (s. 4.2)
** Only the outputs that have been enabled
during the output setup are available (s. 4.5).
• Make sure the proper output is se-
lected before assigning the relays.
Refer to the previous section for further information
on the relay assignment.
• Select " " to assign a relay to the se-
lected output. Select “
TMR
” to assign
a timer relay to the selected output
(available on fan stages 2-15 only). The
display “
- - -
”
indicates a relay that is
not assigned to the output.
• Proceed in similar fashion to assign the relays of every output in use (heaters,
fan stages, cooling outputs, tunnel curtain, clock outputs, backup relay, low
pressure alarm relay and lights). Relays must be assigned separately for each
program.
Main Menu
11.
Alarm Log
12.
Controller Setup
Controller Setup
5.
Relay Assignment
6.
Variable Output Assignment
Relay Assignment
1.
Heaters
2.
Fan Stages
3.
Coolings
4.
Tunnel Curtain
5.
Clock Outputs
6.
Backup Relay
7.
Low Pressure Alarm
8.
Lights
Heater 1 Relay Assignment
1
2 3 4 5 6 7 8
--- --- --- --- --- --- --- ---
9
10
11
12
13
14
15
16
--- --- --- --- --- --- --- ---
17
18
19
20
21
22
23
24
--- --- --- --- --- --- --- ---
25
26
27
28
29
30
31
32
--- --- --- --- --- --- --- ---
Exit: Press BackChange: Press Modify
Press
to Select an Item
Summary of Contents for Integra EXPERT 64EU
