13
EXPERT 64EU rev.03
EXPERT 64EU
LARGE LCD DISPLAY:
LCD Screen & Screen Contrast:
The large LCD display
shows the various readings and parameters. The screen
contrast can be modified using the potentiometer located
behind the screen: open the controller’s front panel to
access the potentiometer then use a screwdriver to adjust
the contrast.
The
Current Conditions menu is automatically selected
after 4 minutes of inactivity.
LED DISPLAY:
This display shows the current average room temperature
and/or the static pressure level. The message “
CLn
” is dis-
played while the controller is in clean mode.
STATUS LEDS:
The status pilot lights indicate the current state of the different stages and outputs.
Refer to section 3.3 for further information about the status leds.
ARROW KEYS:
The arrow keys are used to navigate within the controller’s menus. The up and down-
arrow keys are also used to adjust a parameter value when it is flashing on the
display.
ENTER / MODIFY BUTTON:
- To enter in a menu:
Pressing this key allows to access the selected menu.
- To modify a parameter:
Pressing this key when a parameter is selected allows to enter the edition mode,
e.g. the parameter flashes on the display, which means that it can now be
modified by using the up and down-arrow keys. Refer to section 3.2 for detailed
steps showing how to modify a parameter.
BACK BUTTON
:
This key is used to return to the previous menu.
LCD CONTRAST
POTENTIOMETER
Summary of Contents for Integra EXPERT 64EU
