37
EXPERT 64EU rev.03
EXPERT 64EU
MAIN SET POINT CURVE:
Select
9. Advanced Settings
2. Set Point Curve
NIGHT SET POINT CURVE:
Select
9. Advanced Settings
2. Set Point Curve
or
4. Night Set Point Settings*
1. Night Set Point Curve
* This menu is only accessible if the night set point
has been enabled in the installation (s. 4.4).
• Set the following parameters.
(Refer to the previous section to get further information on these parameters)
THE CURVE STATUS MUST BE TURNED OFF IN ORDER TO MODIFY THE
STEPS.
Day Number:
Set the day for each of the 10 steps. This number corresponds to the animal
age and is adjustable from -5 to 450 days. Negative values are used to prepare
the house before the arrival of the animals.
Temperature:
Set the temperature which is associated with each step of the curve.
Curve Status:
Select
“Yes”
to activate the curve. Once it is enabled, the set point automatically
becomes adjusted between consecutive points of the curve; for this reason,
the set point and curve steps cannot be modified while the curve is active.
Main Menu
9.
Advanced Settings
10.
Select Program
Advanced Settings
2.
Set Point Curve
3.
Relative Humidity Compensation
4.
Night Set Point Settings
Exit: Press Back Submenu: Press Enter
Press
to Select an Item
Set Point Curve
Set Point
70.0
°F
day 1
78.0°F
day 10
75.0°F
day 15
70.0°F
day 20
65.0°F
day 25
63.0°F
day 30
61.0°F
day 35
60.0°F
day 40
60.0°F
day 45
60.0°F
day 50
60.0°F
Curve Status Off
Exit: Press Back
Change: Press Modify
Press to Select an Item
Summary of Contents for Integra EXPERT 64EU
