Cumberland Integra EXPERT 64EU, User Manual

Page: 16 / 102

16
EXPERT 64EU rev.03
4. CONTROLLER SETUP
4.1 Setting the Time & Date
Select
9. Advanced Settings
1. Time and Date
• Press the Enter / Modify button then
use the up and down-arrow keys to set
the current day of the week.
• Press the Enter / Modify button to step
to the next item then use the up and
down-arrow keys to set the selected
item.
• Proceed in similar fashion to set the
whole time and date.
4.1.1 Day / Night Times
If night functions are used, the user must specify the time at which the day and night
start and the transition time between both. The transition time is the interval of time
over which the controller gradually switches from daytime to night time settings.
The following menu is only accessible if
the night set point has been enabled
(s. 4.4).
Select
9. Advanced Settings
4. Night Set Point Settings
2. Day/Night Time
• Set the day and night’s start times
and the transition time between the
day and night.
Main Menu
9. Advanced Settings
10. Select Program
11. Alarm Log
12. Controller Setup
Submenu: Press Enter
Press to Select an Item
Advanced Settings
1. Time and Date
2. Set Point Curve
3. Relative Humidity Compensation
4. Night Set Point Settings
Exit: Press Back Submenu: Press Enter
Press to Select an Item
Time and Date
Wed Aug 27 2003
7 : 07 : 07 PM
Exit: Press Back Change: Press Modify
Press to Select an Item
Main Menu
9. Advanced Settings
10. Select Program
11. Alarm Log
12. Controller Setup
Submenu: Press Enter
Press to Select an Item
Advanced Settings
3. Relative Humidity Compensation
4. Night Set Point Settings
Exit: Press Back Submenu: Press Enter
Press to Select an Item
Night Set Point Settings
1. Night Set Point Curve
2. Day / Night Time
Exit: Press Back Submenu: Press Enter
Press to Select an Item
Day / Night Time
Day Starts At 7:30 A
NightStarts At 8:00 P
Transition Time 30 min
Exit: Press Back Change: Press Modify
Press to Select an Item