60
EXPERT 64EU rev.03
EXPERT 64EU
6.4.2 Settings
6.4.2.1
Chimney Damper Settings
Select
8. Start / Stop Temperature
6-9. Select a Chimney Output
* Only accessible if 0-10V chimney dampers are enabled
(sec. 4.5)
• Set the appropriate parameters amongst
the following:
(Refer to the section 6.4.1.1 to get further information
on these parameters)
Opening Stage 0:
Set the opening of the chimney damper
when the fans are turned off during the
minimum ventilation cycles.
Opening Stages 1-15:
Set the opening that is associated with the activation of each fan stage.
Adjustable from 0 to 100 %.
Opening Stages 1-14 Max:
Set the opening that is attained when a variable fan stage reaches its full
speed. Adjustable from 0 to 100 %.
6.4.2.2
Inlet Settings: Probe Assignment
The air inlets’ temperature compensation
function compares the average reading of
these probes to the average reading of
the room temperature probes (s. 6.4.1.2).
Select
6. Inlet Setup
1. Probe Assignment
Select an inlet
• Select desired probes:
The compensation on the inlet’s
opening is based on the average
reading of these probes.
Main Menu
6.
Inlet Setup
7.
Light Settings
8.
Start / Stop Temperature
9.
Advanced Settings
10.
Select Program
11.
Alarm Log
12.
Controller Setup
Submenu: Press Enter
Press
to Select an Item
Inlet Setup
1.
Probe Assignment
2.
Opening
Inlet Probe Assignment
1.
Inlet 1
2.
Inlet 2
3.
Inlet 3
4.
Inlet 4
5.
Inlet 5
6.
Inlet 6
7.
Inlet 7
8.
Inlet 8
9.
Inlet 9
10.
Inlet 10
11.
Inlet 11
12.
Inlet 12
Exit: Press Back Submenu: Press Enter
Press to Select an Item
Inlet x Probe Assignment
1
2
3
4
5
6
7
8
--- --- ---
Exit: Press BackChange: Press Modify
Press to Select an Item
Main Menu
8.
Start / Stop Temperature
9.
Advanced Settings
10.
Select Program
11.
Alarm Log
12.
Controller Setup
Submenu: Press Enter
Press
to Select an Item
Start / Stop Temperature Settings
6.
Chimney Output 1 (0-10V)
7.
Chimney Output 2 (0-10V)
8.
Chimney Output 3 (0-10V)
9.
Chimney Output 4 (0-10V)
11.
Alarms
Exit: Press Back
Submenu: Press Enter
Press
to Select an Item
0-10V Output X Chimney Damper Settings
Opening Stage 0
0 %
Opening Stage 1
5 %
Opening Stage 1 Max
10 %
Opening Stage 2
15 %
Opening Stage 2 Max
20 %
(...)
Opening Stage 14
90 %
Opening Stage 14 Max
95 %
Opening Stage 15
100 %
Exit: Press Back
Change: Press Modify
Press to Select an Item
Summary of Contents for Integra EXPERT 64EU
