Checchi & Magli TRIUM, Use And Maintenance Manual

Page: 71 / 196

UN41-0154NI
A
B
C
English language Use and maintenance
29
MAINTENANCE INFORMATION
7
Maintenance advice
Maintenance work must be carried out with the work
vehicle on flat, compact ground, with the tractor en-
gine off, parking brake engaged, and ignition key re-
moved, and adopting all the necessary safety meas-
ures required to work safely.
Any maintenance operations that can be carried out
on the business premises come under the ordinary maintenance envisaged in the instruction manual.
Special maintenance operations require a special-
ised workshop on the premises which meets the
requirements specified by the relative laws in force
(appropriate equipment suitably trained staff etc.);
if you do not have a compliant workshop, contact an
authorised one.
Maintenance intervals schedule
To guarantee constant,
efficient and safe machine op-
eration, ensure all the maintenance envisaged by the
Cleaning the ploughshare
Clean the ploughshare to remove any debris, mud, peat,
plant residues etc that may have built up during use.
Proceed as outlined below.
1) Lift the work vehicle off the ground.
2) Loosen the wing nut (
A
).
3) Turn the lock lever (
B
).
4) Push the ploughshare forwards and turn it so it is fac-
ing downwards.
5) Clean the ploughshare with the tool provided (
C
).
6) Once the cleaning is complete, replace the plough-
share in the working position.
7) Check that the (Plant Control) plate is inside the
ploughshare.
8) Make sure that the ploughshare is secured in place
with the lock lever (
B
).
9) Tighten the wing nut (
A
).
Frequency Component Type of work Manual reference
Every
Dispenser Cleaning
Ploughshare Cleaning Cleaning the ploughshare
Every day
Lift frame Inspection
Safety devices Inspection Guards
Warning and hazard plates Inspection Information and safety signs
Every 50 hours
Machine components Greasing Lubrication diagram
Nuts and bolts Tightening
Every 150 hours Tyres Pressure check Tyres check
manufacturer is carried out.
Maintenance schedule
Lack of cleaning will limit the ejector range, there-
fore, as well as affecting the machine’s operation, it
also causes serious mechanical damage.