Checchi & Magli TRIUM, Use And Maintenance Manual

Page: 62 / 196

UN41-0616IN
28
26
22 20 19 17 16 15 14 13
z 4
z 2
z 3
z 6
z 1
z 5
UN41-0145NI
B C
A
English language Use and maintenance
20
ADJUSTMENT INFORMATION
5
OPTIONAL EQUIPMENT PACKAGE 26 - 81 RAPID SHIFT (LH)
Plant spacing distance N. teeth on the pinions
cm inches z 1 z 1 z 2 z 3 z 4 z 5 z 6
26 10 - 1/4
15 18
14
13 22
28
28 11 26
33 13 22
37 14 - 5/8 20
39 15 - 5/16 19
43 17 17
46 18 -1/8 16
52 20 - 1/2 -
20
20
55 21 - 5/8 - 19
61 24 - 17
65 25 - 5/8 - 16
70 27 - 1/2 - 15
75 29 - 1/2 - 14
81 31 - 7/8 - 13
(10 cups) (6 - 12 cups)
P
la
te c
ode: 401482
Adjusting the dispenser/ ejection timing
When the plant falls into the ploughshare (
C
), the ejector
( B ) should be in the rear position and should then start
pushing the plant to eject it.
If the conditions allow high- or low-speed planting, cor-
rect timing between the dispenser and the ejector can
be maintained by adjusting the dispenser.
Proceed as outlined below.
1) Loosen the screws ( A ).
2) Turn the dispenser clockwise to speed up the ejec-
tor’s pushing action or rotate the dispenser anticlock-
wise to delay the pushing action.
The notches on the dispenser allow accurate timing
adjustment.
3) Tighten the screws (
A
).