Checchi & Magli TRIUM, Use And Maintenance Manual

Page: 48 / 196

UN41-0617IN
M
G
H
F
E
D
B C A
L
English language Use and maintenance
6
TECHNICAL INFORMATION
2
A) Hazard plate:
read the use and maintenance manual
before using the work vehicle.
B) Hazard plate:
do not remain on the seat with the
work vehicle lifted off the ground.
C) Hazard plate: switch off the tractor; remove the igni-
tion key and store in a safe place before carrying out
any type of work on the work vehicle.
D) Information plate: strap up at the anchor points
shown to lift the work vehicle.
E) Hazard plate: this highlights a risk of hands being
crushed between the dispenser and the dispenser
disc.
Information and safety signs
WARNING
Check that all the plates are legible; if they are not,
clean them or - if they are damaged - replace them,
applying the new ones in the same place as the old
ones.
The illustration shows the locations and meanings of the
safety signs.
F) Information plate:
lubricate the chain inside the
casing to which the plat
e is affixed.
G) Plant spacing plate (standard):
this shows the type
of pinion to fit according to the plant spacing re-
quired.
H) Plant spacing plate (option ):
this shows the type of
pinion to fit according to the plant spacing required.
L) Information plate:
this shows the greasing points.
M) Information plate:
this indicates rotation of the part
to which the plate is applied, showing the direction
required to achieve the desired effect.