![background image](http://html1.mh-extra.com/html/carrier/aquaforce-30xv140/aquaforce-30xv140_controls-start-up-operation-service-and-troubleshooting-instructions_2562366011.webp)
11
Fig. 11 — General Configuration
Touch the field corresponding to the parameter to be modified
and make the necessary changes. When all necessary changes
have been made, touch the Save button
to confirm or the
Cancel button
to cancel changes. For a complete list of
general parameters, see Appendix A.
TRENDING SCREEN
The Trend Display screen allows for easy monitoring of parame-
ters selected by the user. To access the Trend Display screen, se-
lect Trend Display
on the Main Menu. See Fig. 12.
Fig. 12 — Trend Display Screen
Select the parameters to be displayed by selecting the box to the
left of the parameter name. The scroll bar on the right of the screen
can be used to see all possible selections; to save a selection touch
the Save Trend Display Options Button. Once the parameters to be
trended are selected and saved, touch the Display Trend Log But-
ton and the trend graph will be displayed. See Fig. 13.
Fig. 13 — Trending Configuration Screen
Use the following buttons to adjust the Trendings display:
MENU ARCHITECTURE
See Fig. 14-16 for Carrier Controller menu structure. The op-
tions displayed depend on the user’s access level as shown in
the figures. The user can navigate through the Carrier Control-
ler display screens by selecting the buttons that appear on the
screen. When a button is selected, either a submenu or a list of
parameters and values will be shown. If the list of parameters
and values is shown, the top line of the display will show either the
menu item name if sub-menu items appear or the table name when
points and values are displayed. Selecting an item will cause a
Point Data dialog box to appear. For a complete list of tables and
points with display names and CCN point names, see Appendixes
A and B.
SETTING TIME AND DATE
The date and time for the controls can be set by opening the
Main
Menu
Configuration Menu
HMI Configuration Menu
Date/Time Configuration
. Select either the NETWORK TIME
SYNC button or SET TIME MANUALLY button. Choosing the
NETWORK TIME SYNC button will allow the controller to syn-
chronize the time with a network server if the chiller control sys-
tem is connected to a network. See Appendix A, page 258. See
Fig. 17 for details required to use Network Time Sync. Selecting
SET TIME MANUALLY button allows the user to configure the
Time Zone and set the date, time, daylight saving time, and wheth-
er today or tomorrow is a holiday. See Fig. 17 for details.
30 5927
Navigate across the time line.
Go to beginning or end of selected period.
Zoom in to magnify the view.
Zoom out to expand the viewed area.
Refresh (reload) data.
LEGEND
1
—
Set the start date
2
—
Set the start hour
3
—
Set the start minutes
4
—
Set the end date
5
—
Set the end hour
6
—
Set the end minutes
7
—
Select Go to graph
a30 5926
Summary of Contents for AquaForce 30XV140
