Canon imageRUNNER ADVANCE C3500 III Series, Service Manual, Page: 974 / 1252

SORTER (Service mode for delivery options) > OPTION (Specification setting mode)
FIN-SP1 2 Finisher special setting 1: All Fin
Detail To execute the Finisher special settings 1.
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Take necessary action in accordance with the instructions from the Quality Support Division.
Display/Adj/Set Range 00000000 to 11111111
Default Value 00000000
FIN-SP2 2 Finisher special setting 2: All Fin
Detail To execute the Finisher special settings 2.
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
Take necessary action in accordance with the instructions from the Quality Support Division.
Display/Adj/Set Range
00000000 to 11111111
Default Value
00000000
NSRT-STC 1 Set stack improve mode:non-sort, Fin-AA1
Detail To set stack improvement mode when not sorting to the stack tray.
When 1 is set, stack delivery is performed at the center reference via processing tray even in non
sort mode resulting in the improvement of stacking alignment.
Use Case When the stacking condition at non-sorting of the stack tray is poor
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Caution When 1 is set:
- Productivity is decreased.
- In the case of the paper type or the paper size that cannot feed via a processing tray , paper is
delivered by non-sort.
Display/Adj/Set Range 0 to 1
0: OFF, 1: ON
Default Value 0
MSTP-TMG 1 Set of manual stpl tmg: Fin-K1/AA1
Detail To set the duration of time before executing automatic stapling at manual staple mode.
As the value is changed by 1, the time is changed by 1 second.
+: Timing is delayed
-: Timing becomes earlier
Use Case Upon user's request
Adj/Set/Operate Method
Enter the setting value, and then press OK key.
Display/Adj/Set Range
1 to 5
Unit
sec
Default Value
3
Additional Functions
Mode
Adjustment/Maintenance> Adjust Action> Time Until Stapling Starts in Stapler Mode
Supplement/Memo The setting of the service mode links the setting of the user mode.
Amount of Change per
Unit
1
8. Service Mode
952