Canon imageRUNNER ADVANCE C3500 III Series, Service Manual, Page: 961 / 1252

SORTER (Service mode for delivery options) > ADJUST (Adjustment mode)
NST-SPD 1 Adj dvry speed at non-collate:Fin-AA1
Detail To adjust the delivery speed to the stack tray in non-collate mode.
As the value is incremented by 1, the delivery speed is increased by 10 mm/sec.
Use Case When the stacking condition in non-collate mode is poor
Adj/Set/Operate Method Enter the setting value (switch negative/positive by -/+ key) and press OK key.
Display/Adj/Set Range -10 to 10
Unit mm/s
Default Value 0
Amount of Change per
Unit
10
FR-ST-PS 1 Adjust staple free pressure: Fin-K1/AA1
Detail To adjust the binding pressure at staple free stapling.
As the value is changed by 1, the binding pressure is changed by 1 mNm.
+: Increase
-: Decrease
Use Case Upon user's request (When changing the binding pressure)
Adj/Set/Operate Method Enter the setting value (switch negative/positive by -/+ key) and press OK key.
Caution The life of staple-free binding unit becomes shorter when increasing the setting value.
Display/Adj/Set Range -15 to 15
Unit mNm
Default Value 0
Amount of Change per
Unit
1
FR-STP-X 1 Adj stpl free stpl pstn (Fd way): Fin-K1
Detail To adjust the staple position in feed direction at staple-free stapling.
As the value is changed by 1, the staple position is moved by 0.1 mm.
+: Toward inlet direction
-: Toward delivery direction
When replacing the Finisher Controller PCB/clearing RAM data, enter the value of service label.
Use Case
- When the staple position in feed direction is displaced at staple-free stapling
- When replacing the Finisher Controller PCB/clearing RAM data
Adj/Set/Operate Method
Enter the setting value (switch negative/positive by -/+ key) and press OK key.
Caution After the setting value is changed, write the changed value in the service label.
Display/Adj/Set Range -15 to 15
Unit mm
Default Value 0
Supplement/Memo Change the paper shift amount in the paper feed direction. The staple free stapler position is not
changed.
Amount of Change per
Unit
0.1
8. Service Mode
939