Canon imageRUNNER ADVANCE C3500 III Series, Service Manual, Page: 795 / 1252

COPIER (Service mode for printer) > OPTION (Specification setting mode) > NETWORK
PROXYRES 2 Setting of proxy response to Windows
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to provide proxy response or return the device status when an inquiry is received
via Windows while the device is in sleep mode.
Use Case When executing status response for query from Windows correctly
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: No proxy response, 1: Proxy response
Default Value 1
WOLTRANS 1 ON/OFF sleep recover by packet reception
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to recover from deep sleep when receiving unicast packets to the machine
(excluding proxy response).
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
1 to 2
1: ON, 2: OFF
Default Value
1
802XTOUT 1 Set of IEEE802.1X authentication timeout
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set timeout value for IEEE802.1X authentication.
If the device executes 802.1X authentication, change the wait time for response from the
authentication server.
Use Case When response from the authentication server is slow/fast
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 10 to 120
Unit sec
Default Value 30
Amount of Change per
Unit
1
SPDALDEL 2 Initialization of SPD value
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To initialize all the SPD values that are under management.
SPD values can be initialized without clearing SRAM.
Use Case
At the time of SPD value mismatch when IPSec Board is added
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: OFF, 1: ON
Default Value 0
Supplement/Memo SPD: Database that manages SA (Security Association).
SPD value is managed when IPSec Board is used. Normally, SRAM needs to be cleared in the
case of mismatch in SPD value.
8. Service Mode
773