Canon imageRUNNER ADVANCE C3500 III Series, Service Manual, Page: 708 / 1252

COPIER (Service mode for printer) > ADJUST (Adjustment mode) > HV-TR
TR-DUP10 2 Sec trn indiv set clr mod/fd side:set 10
Detail To set the color mode and feed side for setting 10.
Setting 10 is the combination condition of environment, paper type (paper weight), color mode/
feed side that are set in TR-ENV10, TR-PPR10 and TR-DUP10. When this condition is satisfied,
the paper allotted voltage adjusted in TR-VL10 is applied at the time of secondary transfer.
The left digit of the setting value represents the color mode and the right digit represents the feed
side.
Use Case When an image failure that differs on the 1st/2nd side occurs (mottled image/density loss due to
excessive transfer/toner scattering on solid image, etc.)
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 11 to 43
Left digit (color mode)
1: Color mode (entire paper), 2: Black mode (entire paper), 3: Color/black mode (leading edge of
paper), 4: Color/black mode (trailing edge of paper)
Right digit (feed side)
1: 1-sided, 2: Auto 2-sided, 3: Multi-purpose Tray 2-sided
Default Value 11
Related Service Mode COPIER> ADJUST> HV-TR> TR-ENV10, TR-PPR10, TR-VL10, 2TR-OFF
Supplement/Memo Up to 16 combination patterns can be set in TR-VL1 to 16 (setting 1 to 16). When there is more
than one setting where all conditions (environment, paper type and color mode/feed side) are the
same, the setting with a smaller setting number is applied.
TR-DUP11 2 Sec trn indiv set clr mod/fd side:set 11
Detail To set the color mode and feed side for setting 11.
Setting 11 is the combination condition of environment, paper type (paper weight), color mode/
feed side that are set in TR-ENV11, TR-PPR11 and TR-DUP11. When this condition is satisfied,
the paper allotted voltage adjusted in TR-VL11 is applied at the time of secondary transfer.
The left digit of the setting value represents the color mode and the right digit represents the feed
side.
Use Case
When an image failure that differs on the 1st/2nd side occurs (mottled image/density loss due to
excessive transfer/toner scattering on solid image, etc.)
Adj/Set/Operate Method
Enter the setting value, and then press OK key.
Display/Adj/Set Range
11 to 43
Left digit (color mode)
1: Color mode (entire paper), 2: Black mode (entire paper), 3: Color/black mode (leading edge of
paper), 4: Color/black mode (trailing edge of paper)
Right digit (feed side)
1: 1-sided, 2: Auto 2-sided, 3: Multi-purpose Tray 2-sided
Default Value 11
Related Service Mode COPIER> ADJUST> HV-TR> TR-ENV11, TR-PPR11, TR-VL11, 2TR-OFF
Supplement/Memo Up to 16 combination patterns can be set in TR-VL1 to 16 (setting 1 to 16). When there is more
than one setting where all conditions (environment, paper type and color mode/feed side) are the
same, the setting with a smaller setting number is applied.
8. Service Mode
686