manualshive.com logo in svg

Canon imageRUNNER ADVANCE C3500 III Series, Service Manual, Page: 505 / 1252

Share
Download
Canon imageRUNNER ADVANCE C3500 III Series Service Manual Download Page 505

34-5001

The value of the color displacement patch exceeded the upper limit (front side)

A. Operation / B. Cause /

C. Remedy

Cause: The value of the color displacement patch on the front side exceeded the upper limit.
1. Clean the Registration Patch Sensor.
2. Replace the Registration Patch Sensor Unit.
3. Replace the ITB Unit.
4. Replace the Laser Scanner Unit.
5. Replace DC Controller PCB.

34-5003

The value of the color displacement patch exceeded the upper limit (rear side)

A. Operation / B. Cause /

C. Remedy

Cause: The value of the color displacement patch on the front side exceeded the upper limit.
1. Clean the Registration Patch Sensor.
2. Replace the Registration Patch Sensor Unit.
3. Replace the ITB Unit.
4. Replace the Laser Scanner Unit.
5. Replace DC Controller PCB.

38-0001

For R&D

A. Operation / B. Cause /

C. Remedy

-

38-0002

For R&D

A. Operation / B. Cause /

C. Remedy

-

38-0101

Application-generated alarm

A. Operation / B. Cause /

C. Remedy

Data Backup Service Application Error (Error by the rock-out of the Device Configuration
Management function),
Error message (E-code: EBD0001)
* This alarm is not displayed on LUI due to the alarm being generated by the application.

38-0102

Application-generated alarm

A. Operation / B. Cause /

C. Remedy

Data Backup Service Application Error (Error when Device Configuration Management data
export),
Error message (E-code: EBD0002)
* This alarm is not displayed on LUI due to the alarm being generated by the application.

38-0103

Application-generated alarm

A. Operation / B. Cause /

C. Remedy

Data Backup Service Application Error (Error for MDAS4BR not to be available),
Error message (E-code: EBD0003)
* This alarm is not displayed on LUI due to the alarm being generated by the application.

38-0104

Application-generated alarm

A. Operation / B. Cause /

C. Remedy

Data Backup Service Application Error (Error when Address book (ADB) folder setting export),
Error message (E-code: EBA0001)
* This alarm is not displayed on LUI due to the alarm being generated by the application.

38-0105

Application-generated alarm

A. Operation / B. Cause /

C. Remedy

Data Backup Service Application Error (Error with the expiration of the start time for scheduled
backup),
Error message (E-code: EBS9997)
* This alarm is not displayed on LUI due to the alarm being generated by the application.

38-0106

Application-generated alarm

A. Operation / B. Cause /

C. Remedy

Data Backup Service Application Error (Error with the power supply of the device having been shut
down forcibly),
Error message (E-code: EBS9998)
* This alarm is not displayed on LUI due to the alarm being generated by the application.

38-0107

Application-generated alarm

A. Operation / B. Cause /

C. Remedy

Data Backup Service Application Error (System error of the export),
Error message (E-code: EBS9999)
* This alarm is not displayed on LUI due to the alarm being generated by the application.

7. Error/Jam/Alarm

483

Summary of Contents for imageRUNNER ADVANCE C3500 III Series





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments