manualshive.com logo in svg

Canon imageRUNNER ADVANCE C3500 III Series, Service Manual, Page: 490 / 1252

Share
Download
Canon imageRUNNER ADVANCE C3500 III Series Service Manual Download Page 490

No.*1

No.*2

T/R

Description

##755

##3755

[T]

at time of ECM transmission, no meaningful signal is received after transmission of
PPS-MPS, causing the procedural signal to be transmitted more than specified.

##757

##3757

[T]

at time of ECM transmission, DCN is received after retransmission of PPS-MPS.

##758

##3758

[T]

at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of PPS-MPS, or T5 time-out (60 sec) has occurred.

##759

##3759

[T]

at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of PPS-MPS.

##760

##3760

[T]

at time of ECM transmission, no meaningful signal is received after transmission of
PPS-EOM, causing the procedural signal to be transmitted more than specified.

##762

##3762

[T]

at time of ECM transmission, DCN is received after transmission of PPS-EOM.

##763

##3763

[T]

at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of PPS-MPS, or T5 time-out (60 sec) has occurred.

##764

##3764

[T]

at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of PPS-EOM.

##765

##3765

[T]

at time of ECM transmission, no meaningful signal is received after transmission of
PPS-EOP, causing the procedural signal to be transmitted more than specified.

##767

##3767

[T]

at time of ECM transmission, DCN is received after transmission of PPS-EOP.

##768

##3768

[T]

at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of PPS-EOP, or T5 time-out (60 sec) has occurred.

##769

##3769

[T]

at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of PPS-EOP.

##770

##3770

[T]

at time of ECM transmission, no meaningful signal is received after transmission of
EOR-NULL, causing the procedural signal to be transmitted more than specified.

##772

##3772

[T]

at time of ECM transmission, DCN is received after transmission of EOR-NULL.

##773

##3773

[T]

at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of EOR-NULL, or T5 time-out (60 sec) has occurred.

##774

##3774

[T]

at time of ECM transmission, ERR is received after transmission of EOR-NULL.

##775

##3775

[T]

at time of ECM transmission, no meaningful signal is received after transmission of
EOR-MPS, causing the procedural signal to be transmitted more than specified.

##777

##3777

[T]

at time of ECM transmission, DCN is received after transmission of EOR-MPS.

##778

##3778

[T]

at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission EOR-MPS, or T5 time-out (60 sec) has occurred.

##779

##3779

[T]

at time of ECM transmission, ERR is received after transmission of EOR-MPS.

##780

##3780

[T]

at time of ECM transmission, no meaningful signal is received after transmission of
EOR-EOM, causing the procedural signal to be transmitted more than specified.

##782

##3782

[T]

at time of ECM transmission, DCN is received after transmission of EOR-EOM.

##783

##3783

[T]

at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of EOR-EOM, or T5 time-out (60 sec) has occurred.

##784

##3784

[T]

at time of ECM transmission, ERR is received after transmission of EOR-EOM.

##785

##3785

[T]

at time of ECM transmission, no meaningful signal is received after transmission of
EOR-EOP, causing the procedural signal to be transmitted more than specified.

##787

##3787

[T]

at time of ECM transmission, DCN is received after transmission of EOR-EOP.

##788

##3788

[T]

at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of EOR-EOP, or T5 time-out (60 sec) has occurred.

##789

##3789

[T]

at time of ECM transmission, ERR is received after transmission of EOR-EOP.

##790

##3790

[R]

at time of ECM reception, ERR is transmitted after transmission of EOR-Q.

##791

##3791

[T/R]

while ECM mode procedure is under way, a signal other than a meaningful signal is
received.

##792

##3792

[R]

at time of ECM reception, PPS-NULL cannot be detected over partial page processing.

##793

##3793

[R]

at time of ECM reception, no effective frame is received while high-speed signal re-
ception is under way, thus causing time-out.

##794

##3794

[T]

at time of ECM reception, PPR with all 0s is received.

##795

##3795

[T/R]

a fault has occurred in code processing for communication.

##796

##3796

[T/R]

a fault has occurred in code processing for communication.

7. Error/Jam/Alarm

468

Summary of Contents for imageRUNNER ADVANCE C3500 III Series





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments