manualshive.com logo in svg

Canon imageRUNNER ADVANCE C3500 III Series, Service Manual, Page: 677 / 1252

Share
Download
Canon imageRUNNER ADVANCE C3500 III Series Service Manual Download Page 677

COPIER (Service mode for printer) > ADJUST (Adjustment mode) > COLOR

PH-OFS-Y

2

Adj Y-clr hi dens area clr balance: PDL

Detail

To adjust the color balance of the high density area of Y-color at PDL print.
As the value is larger, the image gets darker.
In case of data generated by the printer driver and stored in Mail Box, a value obtained by adding
the value adjusted in [Fine Adjust Density] in [Access Stored Files] to the setting value of this item
is applied as the actual density value.
e.g.: When the value of this item is "-4" and the value of [Fine Adjust Density] is "5", the density
value is "1".
Note that the density value must be within the rage from -8 to 8.
e.g.: When the value of this item is "7" and the value of [Fine Adjust Density] is "5", the density
value is "8".

Adj/Set/Operate Method

1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.

Display/Adj/Set Range

-8 to 8

Default Value

0

Additional Functions

Mode

Copy> Options> Color Balance> Fine Adjust Density
Access Stored Files> Mail Box> Print> Change Print Settings> Options> Color Balance> Fine
Adjust Density
Adjustment/Maintenance> Adjust Image Quality> Color Balance> Non-Coated> Fine Adjust
Density
Adjustment/Maintenance> Adjust Image Quality> Color Balance> Coated> Fine Adjust Density

Supplement/Memo

In [Fine Adjust Density] in [Adjustment/Maintenance], the same value is set as the density for copy
operation and file storage.
In [Fine Adjust Density] under [Copy] and [Access Stored Files] in the main menu, the density value
can be set individually. Although the setting value of this item is just one value, the density may
differ for copy operation and file storage.

PH-OFS-M

2

Adj M-clr hi dens area clr balance: PDL

Detail

To adjust the color balance of the high density area of M-color at PDL print.
As the value is larger, the image gets darker.
In case of data generated by the printer driver and stored in Mail Box, a value obtained by adding
the value adjusted in [Fine Adjust Density] in [Access Stored Files] to the setting value of this item
is applied as the actual density value.
e.g.: When the value of this item is "-4" and the value of [Fine Adjust Density] is "5", the density
value is "1".
Note that the density value must be within the rage from -8 to 8.
e.g.: When the value of this item is "7" and the value of [Fine Adjust Density] is "5", the density
value is "8".

Adj/Set/Operate Method

1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.

Display/Adj/Set Range

-8 to 8

Default Value

0

Additional Functions

Mode

Copy> Options> Color Balance> Fine Adjust Density
Access Stored Files> Mail Box> Print> Change Print Settings> Options> Color Balance> Fine
Adjust Density
Adjustment/Maintenance> Adjust Image Quality> Color Balance> Non-Coated> Fine Adjust
Density
Adjustment/Maintenance> Adjust Image Quality> Color Balance> Coated> Fine Adjust Density

Supplement/Memo

In [Fine Adjust Density] in [Adjustment/Maintenance], the same value is set as the density for copy
operation and file storage.
In [Fine Adjust Density] under [Copy] and [Access Stored Files] in the main menu, the density value
can be set individually. Although the setting value of this item is just one value, the density may
differ for copy operation and file storage.

8. Service Mode

655

Summary of Contents for imageRUNNER ADVANCE C3500 III Series





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments