Canon imageRUNNER ADVANCE C3500 III Series, Service Manual, Page: 729 / 1252

COPIER (Service mode for printer) > ADJUST (Adjustment mode) > CST-ADJ
CST-VLM3 2 Adj Cassette 3 level detect threshold VL
Detail To adjust the timing to switch the scale indicating paper level in the Cassette 3 from "3" to "2".
Since the paper level to display is switched at the height where papers are stacked, the paper level
detection can be changed by adjusting the timing to detect it.
To increase the paper levels to display (from "2" to "3"), enter a positive (+) value.
To decrease the paper levels to display (from "3" to "2"), enter a negative (-) value.
Use Case Upon user's request (to individually adjust the timing to switch the paper level display)
Adj/Set/Operate Method 1) Enter the setting value (switch positive/negative by +/- key) and press OK key
2) Pull out and then insert the cassette.
3) Check the paper level in the cassette.
Caution - The setting is reflected after removing and then installing the cassette.
- When the value is increased/decreased greatly, the actual timing may be deviated from the target.
Therefore, change the value by 1 at a time while checking the scale.
Display/Adj/Set Range -4 to 4
Appropriate Target Value 0
Default Value 0
Supplement/Memo The timing to switch the scale indicating paper level from "3" to "2" varies individually.
CST-VLM4 2 Adj Cassette 4 level detect threshold VL
Detail To adjust the timing to switch the scale indicating paper level in the Cassette 4 from "3" to "2".
Since the paper level to display is switched at the height where papers are stacked, the paper level
detection can be changed by adjusting the timing to detect it.
To increase the paper levels to display (from "2" to "3"), enter a positive (+) value.
To decrease the paper levels to display (from "3" to "2"), enter a negative (-) value.
Use Case
Upon user's request (to individually adjust the timing to switch the paper level display)
Adj/Set/Operate Method
1) Enter the setting value (switch positive/negative by +/- key) and press OK key
2) Pull out and then insert the cassette.
3) Check the paper level in the cassette.
Caution - The setting is reflected after removing and then installing the cassette.
- When the value is increased/decreased greatly, the actual timing may be deviated from the target.
Therefore, change the value by 1 at a time while checking the scale.
Display/Adj/Set Range -4 to 4
Appropriate Target Value 0
Default Value 0
Supplement/Memo The timing to switch the scale indicating paper level from "3" to "2" varies individually.
MF-MAX 1 Adj of Multi-purpose Tray maximum width
Detail To adjust the maximum width of the Multi-purpose Tray.
When replacing the DC Controller PCB/clearing RAM data, enter the value of service label.
When registering a new value, execute COPIER> FUNCTION> CST> MF-MAX.
Use Case - When replacing the DC Controller PCB/clearing RAM data
- When registering a new value
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Caution - After the setting value is changed, write the changed value in the service label.
- Be sure to adjust MF-MIN together with this item.
Display/Adj/Set Range 0 to 255
Default Value According to the setting at shipment
Related Service Mode
COPIER> FUNCTION> CST> MF-MAX
COPIER> ADJUST> CST-ADJ> MF-MIN
8. Service Mode
707