Canon imageRUNNER ADVANCE C3500 III Series, Service Manual, Page: 870 / 1252

COPIER (Service mode for printer) > OPTION (Specification setting mode) > USER
CNT-PRT 2 ON/OFF of parts counter report output
Detail To set whether to print parts counter values on the counter report.
Use Case When grasping the estimated life of parts while the monitoring service function is not used
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: OFF (Not print), 1: ON (Print)
Default Value It differs according to the location.
Additional Functions
Mode
Check Counter> Print List
JA-WIFI 2 Setting of SAM Wi-Fi direct print
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to allow Wi-Fi direct print when iW SAM is enabled.
Wi-Fi direct print cannot be used when iW SAM is enabled. However, when 1 is set, it can be used.
Use Case When the operation restriction is cleared at the time of iW SAM
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Disabled, 1: Enabled
Default Value 0
C-P-SIZE 2 [For customization]
MF-FEED 1 Manual restart w/OK key: no ppr on MP Tr
Detail If the following three conditions are satisfied, pickup is not restarted automatically when placing
paper on the Multi-purpose Tray.
1. The setting of "Preferences> Paper Settings> Multi-Purpose Tray Defaults" is "Fixed".
2. The job type is PDL.
3. The setting value of this service mode is 1.
4. Paper is placed at occurrence of no paper on the Multi-Purpose Tray.
Use Case Upon user's request. Use this item for customization for Aeon during application of service mode.
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 0 to 1
0: OFF, 1: ON
Default Value 0
Additional Functions
Mode
Preferences> Paper Settings> Multi-Purpose Tray Defaults
TNRBEXGR 2 ON/OFF oprtn hold: Tonr Cont early rplce
Detail To set whether to hold the operation when the Toner Container is prematurely replaced although
it can still be used.
When a new Toner Container is inserted while 1 is set, a message is displayed and the operation
is held.
The message disappears by changing the Toner Container back to the one before replacement
or by changing the setting value of this item to 0 and then restarting the machine.
Use Case When preventing from replacing the Toner Container prematurely
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
The message does not disappear unless the Toner Container is changed back to the one before
the replacement. Be sure to get approval from the user by telling the above specifications before
making the setting.
Display/Adj/Set Range
0 to 1
0: OFF, 1: ON
Default Value
0
8. Service Mode
848