Canon imageRUNNER ADVANCE C3500 III Series, Service Manual, Page: 723 / 1252

COPIER (Service mode for printer) > ADJUST (Adjustment mode) > FEED-ADJ
ADJ-C4RE 1 Write start pstn in horz scan:Cst4 2nd
Detail To adjust the image write start position on the second side in the horizontal scanning direction
when feeding paper from the Cassette 4.
As the value is changed by 1, the left margin is changed by 0.1 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the value of service label.
Use Case When replacing the DC Controller PCB/clearing RAM data
Adj/Set/Operate Method Enter the setting value (switch negative/positive by -/+ key) and press OK key.
Display/Adj/Set Range -55 to 55
Unit mm
Default Value 0
Amount of Change per
Unit
0.1
ADJ-MFRE 1 Write start pstn in horz scan:MPTray 2nd
Detail To adjust the image write start position on the second side in the horizontal scanning direction
when feeding paper from the Multi-purpose Tray.
As the value is changed by 1, the left margin is changed by 0.1 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the value of service label.
Use Case When replacing the DC Controller PCB/clearing RAM data
Adj/Set/Operate Method Enter the setting value (switch negative/positive by -/+ key) and press OK key.
Display/Adj/Set Range -55 to 55
Unit mm
Default Value 0
Amount of Change per
Unit
0.1
REG-THCK 1 Adj paper leading edge margin: 1/2 speed
Detail To adjust the leading edge margin at 1/2 speed by changing the timing to turn ON the Registration
Motor.
As the value is changed by 1, the leading edge margin is changed by 0.1 mm.
+: Leading edge margin becomes larger. (An image moves downward.)
+: Leading edge margin becomes smaller. (An image moves upward.)
Adj/Set/Operate Method
Enter the setting value (switch negative/positive by -/+ key) and press OK key.
Display/Adj/Set Range
-50 to 50
Unit
mm
Default Value 0
Amount of Change per
Unit
0.1
8. Service Mode
701