Canon imageRUNNER ADVANCE C3500 III Series, Service Manual, Page: 799 / 1252

COPIER (Service mode for printer) > OPTION (Specification setting mode) > NETWORK
FTPMODE 1 Set of FTP print default operation mode
Detail To set the default operation mode of FTP print.
Switch the default operation mode between ASCII mode and BIN mode in accordance with user's
environment.
Use Case At installation
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: ASCII mode, 1: BIN mode
Default Value 0
SSLMODE 2 Setting of HTTP/HTTPS port open/close
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to open or close HTTP/HTTPS port.
When 1 is set while [Use HTTP] is ON and [Use TLS] is OFF in Settings/Registration menu, HTTP
port is opened whereas HTTPS port is closed.
When 2 is set while both [Use HTTP] and [Use TLS] are ON in Settings/Registration menu, HTTP
port is closed whereas HTTPS port is opened.
Use Case
When limiting the port to open because of security concern
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 2
0: Normal, 1: Open HTTP port (80/8000) only, 2: Open HTTPS port (443/8443) only
Default Value
0
Additional Functions
Mode
Preferences> Network> TCP/IP Settings> Use HTTP
Management Settings> License/Other> MEAP Settings> Use TLS
SSLSTRNG 2 Allow weak encryption algorithm for SSL
Detail To set whether to allow using weak encryption algorithm for SSL.
When 1 is set, weak encryption algorithm cannot be used.
Use Case When prohibiting weak encryption algorithm because of security concern
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Normal mode, 1: Secured mode (TLS_RSA_WITH_RC4_128_SHA and TLS_RSA_WITH_
RC4_128_MD5 are not used)
Default Value 1
NW-WAIT 2 Set connect wait at deep sleep recovery
Detail To set whether to send wakeup notice after the time set in Settings/Registration menu has elapsed
when recovering from deep sleep.
When 0 is set, wakeup notice is sent after "Waiting Time for Connection at Startup" has elapsed.
When 1 is set, wakeup notice is sent when the machine becomes ready for communication.
Use Case When a failure of the device management tool occurs
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Wait, 1: Not wait
Default Value
0
Additional Functions
Mode
Preferences> Network> Waiting Time for Connection at Startup
8. Service Mode
777