Canon imageRUNNER ADVANCE C3500 III Series, Service Manual, Page: 815 / 1252

COPIER (Service mode for printer) > OPTION (Specification setting mode) > IMG-MCON
BMLNKS-Z 1 Set img proc at BMLinkS reception print
Detail To set the image processing which is performed when printing received BMLinkS.
Use Case When there is a request for image improvement
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 3
0: Equivalent to PDL text mode (Black text is reproduced with 4 colors. Error diffused image. The
hue of the photo area is more vivid than that of 2.)
1: Equivalent to PDL photo mode (Black text is reproduced with 4 colors. Screen processed image.)
2: Equivalent to scanned text mode (Black text is reproduced with a single Bk color. Error diffused
image. The hue of the photo area might be different from that of 0.)
3: Equivalent to scanned photo mode (Black text is reproduced with a single Bk color. Screen
processed image.)
Default Value 0
Supplement/Memo BMLinkS (Business Machine Linkage Service): An integrated network OA device interface
REDU-CNT 2 Set toner deposit amount limt at clr adj
Detail To set whether to limit the toner deposit amount at color adjustment (color balance, fine adjustment
of density).
When 0 is set, the color adjustment value is reflected to an image precisely, but toner scattering
in the transfer section and fixing section may occur or paper may wind around the Fixing Film.
When setting 1 for IMGC-ADJ, this setting can be also made in [Adjust Toner Volume Used for
Color Printing] in [Settings/Registration].
Use Case
- Upon user's request
- When reflecting the color adjustment value to an image precisely
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
When 0 is set, toner scattering in the transfer section and fixing section or paper wrapping in the
fixing section may occur.
Display/Adj/Set Range
0 to 1
0: Toner deposit amount is not limited.
1: Toner deposit amount is limited to the specified amount.
Default Value 1
Related Service Mode COPIER> OPTION> DSPLY-SW> IMGC-ADJ
Additional Functions
Mode
Adjustment/Maintenance> Adjust Image Quality> Adjust Toner Volume Used for Color Printing
VP-ART 2 Setting of line art processing
Detail To set outline processing for line art on scalable PDF.
In the outline processing, a binary image outline is extracted in the field which is recognized as
line art, and is converted into vector data.
Specify whether to convert the binary image outline into vector data or to recognize it as one line
(as a thin line). For the thin line, the line width can be specified.
Change this value when you want to obtain an output of a wide-width line as one line rather than
as an outline (when you want to prioritize edit operation as a line rather than image quality).
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 99
Default Value
1
8. Service Mode
793