Canon imageRUNNER ADVANCE C3500 III Series, Service Manual, Page: 790 / 1252

COPIER (Service mode for printer) > OPTION (Specification setting mode) > DSPLY-SW
JLG-UD-D 1 [For customization]
UFOS-DSP 1 Display/hide of uniFLOW Setup
Detail Service mode to switch to display or hide [uniFLOW Setup].
Use Case
When to switch to display or hide [uniFLOW Setup]
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Hide, 1: Display
Default Value
It differs according to the location.
Additional Functions
Mode
Main Menu > uniFLOW Setup
Supplement/Memo uniFLOW : The name of the product destined for China is "mdsFLOW".
SVC-DAT 1 For R&D
■ NETWORK
COPIER (Service mode for printer) > OPTION (Specification setting mode) > NETWORK
RAW-DATA 2 Setting of received data print mode
Detail To set print mode for the received image data.
This item is used to identify the cause whether it's due to image data or image processing in the
case of problem with received image.
Use Case When a problem with received image occurs
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to set the value back to 0 after recovering from the problem.
Display/Adj/Set Range 0 to 1
0: Normal print operation, 1: Print with original data without image processing
Default Value 0
IFAX-LIM 2 No. of max print lines at IFAX reception
Detail To set the maximum number of lines for e-mail text to be printed when receiving IFAX.
Setting of this item can prevent endless printing of the attached file data in the case of receiving
an error e-mail or failure in interpretation of the context.
Selecting 0 prints the header/footer in 1 sheet when receiving e-mail text without attached file.
Use Case
When preventing endless print in the case of failure in reception
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 999
0: E-mail text not printed, 999: Unlimited
Default Value
500
SMTPTXPN 2 Setting of SMTP TX port number
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set SMTP transmission port number.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 65535
Default Value 25
8. Service Mode
768