Canon imageRUNNER ADVANCE C3500 III Series, Service Manual, Page: 808 / 1252

COPIER (Service mode for printer) > OPTION (Specification setting mode) > IMG-SPD
ARC-INT1 2 Set ARCDAT control interruption interval
Detail To set the number of sheets as the intervals at which ARCDAT control is executed.
When the number of sheets reaches the specified value, the control is executed at paper intervals
by interrupting an ongoing job.
Decrease the value when the density varies dramatically. As the value is smaller, density variation
is decreased, but productivity is also decreased.
Increase the value when preferring to minimize decrease in productivity due to interruption. As the
value is larger, productivity is increased, but there is a difference in density before and after the
interruption.
Use Case - When the density varies dramatically
- When preferring to minimize decrease in productivity due to interruption
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 5 to 1000
Unit sheet
Default Value 100
Related Service Mode COPIER> OPTION> IMG-SPD> ARC-INT2
Amount of Change per
Unit
1
ARC-INT2 2 Set ARCDAT ctrl exe intvl: last rotation
Detail To set the number of sheets as the intervals to execute ARCDAT control at lost rotation.
ARCDAT control is not executed at paper interval while feeding the specified number of sheets
from the start of a job. ARCDAT control which is supposed to be executed during feeding of the
specified number of sheets is executed at last rotation of the previous job.
As the value is increased, the number of interruptions during a job is reduced so productivity is
increased.
Use Case When preferring to minimize decrease in productivity due to interruption
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Caution Do not set a value larger than that of ARC-INT1.
Display/Adj/Set Range 5 to 1000
Unit sheet
Default Value 70
Related Service Mode COPIER> OPTION> IMG-SPD> ARC-INT1
Amount of Change per
Unit
1
8. Service Mode
786