Canon imageRUNNER ADVANCE C3500 III Series, Service Manual, Page: 793 / 1252

COPIER (Service mode for printer) > OPTION (Specification setting mode) > NETWORK
NS-LGN 2 Limit LOGIN authentication at SMTP auth
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To restrict use of LOGIN authentication at the time of SMTP authentication.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: SMTP server-dependent, 1: Not used
Default Value 0
Supplement/Memo SMTP authentication: Protocol in which user authentication function is added to SMTP, which is
the protocol to be used for e-mail transmission. At the time of e-mail transmission, this protocol
executes authentication of the user account and the password between the SMTP server and the
user to approve e-mail transmission only when it's authenticated.
MEAP-PN 2 HTTP port No.setting of MEAP application
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set HTTP port number of MEAP application.
Use Case
Upon user's request
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
Do not specify port 8080 when the Print Server is connected. Otherwise, you cannot browse the
device RUI in which MEAP authentication application is running (Port 8080 is reserved for
redirection of EFI Controller to the iR side.)
Display/Adj/Set Range
1 to 65535
Default Value 8000
MEAP-SSL 2 HTTPS port setting of MEAP
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the port of HTTPS server in the case of using SSL with HTTP of MEAP.
Use Case When specifying the setting of HTTPS port for MEAP
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 1 to 65535
Default Value 8443
LPD-PORT 2 Setting of LPD port number
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the LPD port number.
Use Case
Upon user's request
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
1 to 65535
Default Value
515
Supplement/Memo
LPD port: Network port for TCP/IP communication when making prints through network.
8. Service Mode
771