Canon imageRUNNER ADVANCE C3500 III Series, Service Manual, Page: 875 / 1252

■ ACC
COPIER (Service mode for printer) > OPTION (Specification setting mode) > ACC
COIN 1 Setting of charge management
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set charge management method.
Use Case At installation of Coin Manager
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution - When setting a value other than 0, "ON" is automatically set to [Delete Job After Printing]. It will
not be returned to "OFF" even if the value is changed back to 0 once it has been changed.
- Following items are automatically specified when changing the value to 3 (from 0 to 2) when
setting 3. The change will not be returned even if changing back the value to 0 to 2 (from 3) once
the mode has been changed.
- COPIER> OPTION> USER> CONTROL, AFN-PSWD=1
- COPIER> OPTION> NETWORK> DA-CNCT=1
- COPIER> OPTION> DSPLY-SW> UI-BOX, UI-SEND, UI-FAX=0
- Preferences> Network> TCP/IP Settings> IPv4 Settings> IP Address Range Settings> RX/Print
Range: Allow IPv4 Address=ON
- Preferences> Network> TCP/IP Settings> IPv6 Settings> IP Address Range Settings> RX/Print
Range: Allow IPv6 Address=ON
- Preferences> Network> TCP/IP Settings> FTP Print Settings> Use FTP Printing=OFF
- Preferences> Network> TCP/IP Settings> IPP Print Settings=ON
- Preferences> Network> SMB Server Settings> SMB Printer Settings> Use SMB=ON
- Function Settings> Send> E-mail/I-Fax Settings> Communication Settings> SMTP Receive,
POP=OFF
- Following items are automatically specified when changing the value to 4 (from 0 to 2) when
setting 4. The change will not be returned even if changing back the value to 0 to 2 (from 4) once
the mode has been changed.
- COPIER> OPTION> USER> AFN-PSWD=1
- COPIER> OPTION> DSPLY-SW> UI-BOX, UI-SEND, UI-FAX, UI-RSCAN, UI-EPRNT, UI-
HOLD=0
- Management Settings> Device Management> Display Log=OFF
Display/Adj/Set Range 0 to 7
0: No charge
1: Charge with Coin Manager
2: Charge with remote counter
3: Charge with DA (only in Japan)
4: Charge with this machine itself
5: New SC mode
6: External charge mode 6
7: External charge mode 7
Default Value 0
Related Service Mode COPIER> OPTION> USER> CONTROL
COPIER> OPTION> DSPLY-SW> UI-BOX, UI-SEND, UI-FAX
COPIER> OPTION> ACC> PDL-THR
Additional Functions
Mode
Function Settings> Send> E-Mail/I-Fax Settings> Communication Settings
Function Settings> Print> Delete Job After Printing
Preferences> Network> TCP/IP Settings> DNS Settings> FTP Print Settings, IPP Print Settings
Supplement/Memo Control card can be used with "No charge".
DA: Digital Accessory
8. Service Mode
853