Canon imageRUNNER ADVANCE C3500 III Series, Service Manual, Page: 1002 / 1252

Using Test Mode
1. Press the desired item to highlight; then, press the OK key to bring up its screen.
The following table shows text mode items that are valid and invalid when a fax board is installed:
Yes: may be used
-: not used
Level 1 Level 2 Fax Board present
MODEM
RELAY-1 Yes
RELAY-2 -
FREQ Yes
G3TX Yes
DTMFTX Yes
TONERX -
V34G3TX Yes
FACULTY
G3 4800TX Yes
SPEAKER -
DETECT1 -
DETECT2 -
DETECT3 -
VOICETX -
DATA SET -
ISDNMOD -
ISDNMOD2 -
CAUTION:
Do not use items in the table identified as "-."
■ MODEM Test
● Relay Test (RELAY-1)
Use it to see if the individual relays on the NCU board go on and off as expected.
<1/1> <MODEM>
<READY>
Report Sssw Menu Num Ncu Type IP FAX Print Clear Test
CML
P
S
H
D
R
<RELAY-1>
OFF
OFF
OFF
OFF
OFF
OFF
OK
Using Text Mode
1. From the relays indicated on the screen, select the one you want to test; then, turn it off or on using the Up/Down
key. (Some of the relays may not actually exist on the NCU board.)
8. Service Mode
980