manualshive.com logo in svg

Canon ImageRunner 5000 Series, User Manual

The Canon ImageRunner 5000 Series is a high-performance multifunction copier that delivers exceptional document management capabilities. Enhance your productivity with this advanced technology by accessing the user manual, available for free download at manualshive.com. Discover seamless document handling through our comprehensive manual.

Share
Download
background image

 

10

 

Table of Contents

 

Recalling a Previous Copy Job 

 

(Recall)

 

 . . . . . . . . . . . . . . . . . . . . . . . . . . .3-58

Inverting Original Images 

 

(Nega/Posi)

 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-60

Making Copies with the Original Image Repeated 

 

(Image Repeat)

 

 . . . . . . .3-62

Making Copies with Image Reversed 

 

(Mirror Image)

 

. . . . . . . . . . . . . . . . . . .3-65

Making Sharp Contrast Copies 

 

(Sharpness)

 

. . . . . . . . . . . . . . . . . . . . . . . . .3-67

 

Chapter 4 

Using the Mail Box Functions

 

Flow of Mail Box Operations  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3

 

Storing Originals in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3
Printing Documents Stored in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . .4-6

 

Scanning Originals into a Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-9

 

Giving a Name to the Document to be Scanned (Document Name) . . . .4-9
Specifying Document Size (Doc. Size Select) . . . . . . . . . . . . . . . . . . . .4-10
Adjusting the Exposure and Image Quality before Scanning the 
Originals (Scanning Exposure)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-11
Changing the Scanning Ratio (Copy Ratio) . . . . . . . . . . . . . . . . . . . . . .4-15
Scanning Two-sided Originals (Two-sided Original) . . . . . . . . . . . . . . . .4-25
Scanning Facing Pages in a Book onto Two Separate Sheets in 
One Step (Two-page Separation). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-27
Scanning Originals for Use as a Booklet (Booklet Scanning)  . . . . . . . .4-28
Erasing Shadows and Frame Lines (Frame Erase) . . . . . . . . . . . . . . . .4-31
Reducing Two, Four or Eight Originals to Fit on a Single Print 
Sheet and Storing it (Image Combination). . . . . . . . . . . . . . . . . . . . . . .4-39
Scanning Different-size Originals Together in the Feeder 
(Different Size Originals)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-43
Scanning Originals Separately Set as One Document (Job Build)  . . . .4-45
Inverting Original Images (Nega/Posi) . . . . . . . . . . . . . . . . . . . . . . . . . .4-47
Scanning Originals after Making them Sharply Contrasted 
(Sharpness) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-49
Storing/ Recalling Scanning Modes (Mode Memory)  . . . . . . . . . . . . . .4-51

 

Printing a Document Stored, in a Box after Changing the Settings . . .4-61

 

Selecting the Print Paper Size (Paper Select) . . . . . . . . . . . . . . . . . . . .4-61
Collating Prints (Finisher). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-63
Two-sided Printing (Two-sided Printing) . . . . . . . . . . . . . . . . . . . . . . . . .4-67
Adding Job Separator Sheets, Front and Back Covers to Printed 
Sets (Cover/Job Separator) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-69
Making Prints for Use as a Booklet (Booklet)  . . . . . . . . . . . . . . . . . . . .4-72
Printing Multiple Documents as One Document (Merge Documents) . .4-75
Storing/ Recalling Often Used Print Setting in Memory 
(Mode Memory) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-77

 

Checking the Print Result or the Image of the Stored Docu-
ment (Sample Print). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-88

Checking the Document’s Detailed Information . . . . . . . . . . . . . . . . . . .4-90

Changing the Name of a Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-91

Moving a Document. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-93

 

E82_US.book  Page 10  Tuesday, May 22, 2001  12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ImageRunner 5000 Series

Oki C910 Hardware preview
C910
Brand: Oki Pages: 2
Oki C910 Material Safety Data Sheet preview
C910
Brand: Oki Pages: 52
Oki C110 Manual Do Usuário preview
C110
Brand: Oki Pages: 117
Oki C110 How To Remove Jammed Paper preview
C110
Brand: Oki Pages: 45
Oki C110 Manual De L'Utilisateur preview
C110
Brand: Oki Pages: 112
Oki C110 Guías Del Usuario Manual preview
C110
Brand: Oki Pages: 115
Oki C110 Quick Setup preview
C110
Brand: Oki Pages: 2
Canon imagePROGRAF iPF760 Setup Manual preview
imagePROGRAF iPF760
Brand: Canon Pages: 12
Canon imagePROGRAF iPF825 MFP Basic Guide No.1 Setup Manual preview
imagePROGRAF iPF825 MFP Basic Guide No.1
Brand: Canon Pages: 16
Canon imagePRESS C850 Practical Manual preview
imagePRESS C850
Brand: Canon Pages: 146
Canon imagePRESS C850 Quick Manual preview
imagePRESS C850
Brand: Canon Pages: 63
Canon imagePROGRAF iPF760 Basic Manual preview
imagePROGRAF iPF760
Brand: Canon Pages: 132
Canon imagePROGRAF iPF825 MFP Basic Guide No.1 Technical Documents preview
imagePROGRAF iPF825 MFP Basic Guide No.1
Brand: Canon Pages: 8
Canon imagePROGRAF TX-2000 Introductory Information preview
imagePROGRAF TX-2000
Brand: Canon Pages: 14
Canon i-SENSYS MF6180dw Manual preview
i-SENSYS MF6180dw
Brand: Canon Pages: 1040
Canon imagePROGRAF iPF815 Basic Manual preview
imagePROGRAF iPF815
Brand: Canon Pages: 48
Canon imageRUNNER 1025 Manual preview
imageRUNNER 1025
Brand: Canon Pages: 6
Canon imageRUNNER 2230 Specification preview
imageRUNNER 2230
Brand: Canon Pages: 6

Brands by name

Popular brands

Load more brands