Canon ImageRunner 5000 Series User Manual Download Page 99

Page: 99 / 523

Basic Cop

ying

Changing the Copy Ratio (Copy Ratio)

2-30

Press the [Other Zoom] key.

Press the [XY Zoom] key.

Press the [X] and [Y] keys and enter each
value for X and Y. Then press the [OK] key.

NOTE

• If you select the [Auto XY Zoom] key, select a paper

size other than the “Auto”. If you select the “Auto”,
the copy ratio is automatically set to the size of the
paper in a certain paper drawer.

• You can enter the value using the Numeric keys

(

) on the control panel.

• If you make a mistake when entering values, press

the [C] key on the touch panel, and enter the cor-
rect values.

• Even if you entered the copy ratio with the Numeric

keys (

), you can change the entered values

with the [–] and [+] keys.

• If you enter a value outside the setting range, a

message prompting you to enter the appropriate
value will appear on the screen.

E82_US.book Page 30 Tuesday, May 22, 2001 12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Search results

Summary of Contents for ImageRunner 5000 Series

Reviews:

Brands by name

Popular brands

Canon ImageRunner 5000 Series, User Manual

Search results

Summary of Contents for ImageRunner 5000 Series

Reviews:

Brands by name

Popular brands