Canon ImageRunner 5000 Series, User Manual

Page: 337 / 523

6
Setting and Adjusting Common Settings to Suit
Y
our
Needs
Setting Specifications that are Common to Each Function (Common Settings) 6-16
2
Select the [Low] or [High] key, and press the
[OK] key.
3
Press the [Done] key.
Repeat this until the Basic Features screen appears again.
Distinguishing LTRR-Size and STMT-Size Originals
When scanning LTRR size or STMT size originals set on the platen glass, you can make a setting to
either distinguish the original sizes manually, or to scan originals of only one of these sizes.
NOTE
• The default setting is “Use LTRR Format”.
1
Call up the desired screen as follows:
2
Select the [Distinguish Manually], [Use LTRR
Format] or [Use STMT Format] key, and press
the [OK] key.
●
When you select the [Distinguish Manually] key:
If you place LTRR or STMT-size original on the
platen glass, a display to select the original size
appears when scanning.
●
When you select the [Use LTRR Format] key:
If you place LTRR or STMT-size original on the
platen glass, the machine detects it as LTRR-
size original.
●
When you select the [Use STMT Format] key:
If you place LTRR or STMT-size original on the
platen glass, the machine detects it as STMT-
size original.
LTRR/ STMT Original Selection
key
Additional Functions
E82_US.book Page 16 Tuesday, May 22, 2001 12:11 AM