manualshive.com logo in svg

Canon ImageRunner 5000 Series, User Manual

Share
Download
Canon ImageRunner 5000 Series User Manual Download Page 401

7-4

7

Loading P

aper and Adding 

T

oner

Loading Paper

3

Open a package of paper, and remove the 
paper stack.

IMPORTANT

• Rewrap any remaining paper in its original pack-

age, and store it in a dry place away from direct 
sunlight.

• Do not copy on the following types of paper stock. 

Doing so may cause a paper jam.
- Severely curled or wrinkled paper.
- Transparencies.
- Paper on which color images have been copied.
- Paper which has been copied on using a digital 

full color copier (do not copy on the reverse side 
either).

- Paper which has been printed on using a thermal 

transfer printer (do not copy on the reverse side 
either).

NOTE

• Paper drawers 1 and 2 hold up to about 1,500 sheets of paper each (20-lb bond (80 g/m

2

)).

• Paper drawers 3 and 4 hold up to about 550 sheets of paper each (20-lb bond (80 g/m

2

)).

• For high-quality prints, we recommend using paper recommended by Canon.

4

Turn the paper stack over, and place it in the 
paper drawer.

Even out the edges of the paper stack. Load the 
paper stack against the right wall of the paper 
drawer.

IMPORTANT

• If the paper is curled, curl it down before placing it 

in the paper drawer.

• Make sure that the height of the paper stack does 

not exceed the limit mark at the back of the paper 
drawer.

• Make sure that the paper size setting in the paper 

drawer matches the size of paper to be loaded.

NOTE

• When loading paper in the paper drawer 3 for the 

first time, set the size plate of the paper loaded in 
the paper drawer.

• For details of print direction of papers already 

printed with logos or patterns, see “Relation of 
Original Orientation and Paper Orientation,” on 
p. 11-9.

E82_US.book  Page 4  Tuesday, May 22, 2001  12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands