manualshive.com logo in svg

Canon ImageRunner 5000 Series, User Manual

Share
Download
Canon ImageRunner 5000 Series User Manual Download Page 283

4

Using the Mail Bo

x Functions

Printing a Document Stored, in a Box after Changing the Settings

4-86

5

Press the [Store/Erase] key.

6

Press the [Erase] key.

7

Select the memory key of the print mode that 
you want to erase, and press the [Next] key.

IMPORTANT

• Check the print settings before you erase them.

NOTE

• The mode memory key where print settings are 

already stored shows a small, black square [

■

] in 

the lower right corner of the key.

• If you selected a memory key to which a printing 

job has already been stored, its settings are dis-
played.

• If there are more stored print modes than currently 

displayed, you can scroll the list using the [

▼

] or 

[

▲

] keys.

E82_US.book  Page 86  Tuesday, May 22, 2001  12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands