Canon ImageRunner 5000 Series User Manual Download

Page: 271 / 523

Using the Mail Bo

x Functions

Printing a Document Stored, in a Box after Changing the Settings

4-74

Select whether or not to saddle stitch the
booklet, and press the [OK] key.

IMPORTANT

• The saddle stitching cannot be set when the Sad-

dle Finisher-F2 (option) is not attached.

• When the number of sheets exceeds 15, the sta-

pling will not be performed, and the sheets will be
output to the output tray.

NOTE

• The available number of output load on the booklet

tray in the saddle stitching is as follows:
- Number of sheets Number of load

1- 5

25 sets

6-10

15 sets

11-15

10 sets

• Saddle Stitching will not be performed when there

is only one sheet. The sheet will only be folded.

Press the [Done] key.

Press the [Start Print] key.

If there is a current job or a previously reserved
job, the machine will start printing after that job is
completed.
(See “Printing Documents Stored in the Box,” on
p. 4-6.)

NOTE

• To cancel the setting, press the [Booklet] and [Can-

cel] keys in that order.

• To cancel the settings, press the [Initial Settings]

key. (The machine returns to the standard mode of
the Local Printing.)

• When you press the

key, the display returns to

the Box selection screen

Reset

E82_US.book Page 74 Tuesday, May 22, 2001 12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Search results

Summary of Contents for ImageRunner 5000 Series

Reviews:

Related manuals for ImageRunner 5000 Series

Brands by name

Popular brands

Canon ImageRunner 5000 Series, User Manual

Search results

Summary of Contents for ImageRunner 5000 Series

Reviews:

Related manuals for ImageRunner 5000 Series

Brands by name

Popular brands