manualshive.com logo in svg

Canon ImageRunner 5000 Series, User Manual

Share
Download
Canon ImageRunner 5000 Series User Manual Download Page 133

3

Useful Cop

y Functions

Adding Front and Back Covers, Insertion Sheets and Chapter Pages to 
Copy Sets (Cover/Sheet Insertion)

3-6

2

Press the [Cover/Sheet Insertion] key.

3

Select the Cover/Sheet Insertion feature you 
want to use, and press the [Next] key.

When you select only the [Chapter Page] mode, 
proceed to step 5. (When you select the [Sheet 
Insertion] or [Chapter Page] mode.)

NOTE

• You cannot select the [Sheet Insertion] and [Chap-

ter Page] modes at the same time.

• You can cancel a mode by pressing the mode key 

again.

4

When copying onto the front cover, back cover 
or insertion sheet, press the [Printed] key, and 
press the [Next] key.

NOTE

• The display will vary depending on the setting in 

step 3.

• The chapter page will always be copied only on 

one side.

E82_US.book  Page 6  Tuesday, May 22, 2001  12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands