Canon ImageRunner 5000 Series User Manual Download Page 273

Page: 273 / 523

Using the Mail Bo

x Functions

Printing a Document Stored, in a Box after Changing the Settings

4-76

Press the [Change P Settings] key.

Press the [Merge Documents] key.

Press the [Start Print] key.

If there is a current job or a previously reserved
job, the machine will start printing after that job is
completed.
(See “Printing Documents Stored in the Box,” on
p. 4-6.)

NOTE

• When printing multiple documents as one docu-

ment, “name of document” displayed during print
will only display the first specified document name.

• To cancel the settings, press the [Initial Settings]

key. (The machine returns to the standard mode of
the Local Printing.)

• When you press the

key, the display returns to

the Box selection screen.

Reset

E82_US.book Page 76 Tuesday, May 22, 2001 12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Search results

Summary of Contents for ImageRunner 5000 Series

Reviews:

Brands by name

Popular brands

Canon ImageRunner 5000 Series, User Manual

Search results

Summary of Contents for ImageRunner 5000 Series

Reviews:

Brands by name

Popular brands