Canon ImageRunner 5000 Series, User Manual

Page: 154 / 523

Erasing Shadows and Frame Lines from Copies (Frame Erase) 3-27
Useful Cop
y Functions
3
5
Set the desired original frame erase width
using the [–] or [+] key, and press the [OK] key.
The value set here is specified uniformly around
the original.
To set frame erase width values for the top,
bottom, left and right sides of the original
independently, press the [Adjust Each Dim.] key.
NOTE
• When entering values in millimeters, you can use
the Numeric keys ( - ) and the key on the
control panel.
• If you enter a value outside the setting range, a
message prompting you to enter the appropriate
value will appear on the screen.
• Even when you enter the values with the Numeric
keys ( - ), you can change the values with the
[–] or [+] key.
• If you want to enter values in millimeters, press the
[mm] key.
• The default setting is 1/8" (4 mm).
●
When you select the [Adjust Each Dim.] key:
Select each side in turn and set the frame erase
width using the [–] or [+] key, and press the [OK]
key.
6
Press the [Done] key.
The display returns to the Basic Features screen.
0 9
C
Clear
0 9
E82_US.book Page 27 Tuesday, May 22, 2001 12:11 AM