manualshive.com logo in svg

Canon ImageRunner 5000 Series, User Manual

Share
Download
Canon ImageRunner 5000 Series User Manual Download Page 228

Scanning Originals into a Box

4-31

4

Using the Mail Bo

x Functions

Erasing Shadows and Frame Lines (Frame Erase)

This mode erases shadows and lines that appear when scanning various types of originals. The 
following three Frame Erase features are available.

IMPORTANT

• Combinations of these three modes cannot be set. If you select one of these modes, the previously set 

mode is canceled.

●

Original Frame Erase
Erases the dark borders and frame lines that appear around the printed paper when the original 
is smaller than the selected record paper size, then records it.

IMPORTANT

• In the Original Frame Erase mode, combined use with the Automatic Document Size Select, Booklet 

Scanning, Different Size Originals, and Image Combination modes cannot be set.

●

Book Frame Erase
Erases the dark borders as well as center and contour lines that appear when printing facing 
pages in a bound original onto a single record paper, then records them.

IMPORTANT

• In the Book Frame Erase mode, combined use with the Automatic Document Size Select, Booklet Scan-

ning, Different Size Originals, and Image Combination modes cannot be set.

●

Binding Erase
Erases the shadows that appear in prints from binding holes in originals, then records them.

IMPORTANT

• In the Binding Frame Erase mode, combined use with the Two-page Separation and Booklet Scanning 

modes cannot be set.

• Do not place originals with binding holes in the feeder, as this may damage the originals.

E82_US.book  Page 31  Tuesday, May 22, 2001  12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands