manualshive.com logo in svg

Canon ImageRunner 5000 Series, User Manual

Share
Download
Canon ImageRunner 5000 Series User Manual Download Page 17

Symbols Used in This Manual

16

Symbols Used in This Manual

When multiple keys which should be operated are displayed in a touch panel display, all 
keys are marked. Select the key which suit your needs.

WARNING

CAUTION

NOTE

IMPORTANT

Indicates a warning concerning operations that may lead to death or injury to 
persons if not performed correctly. In order to use the machine safely, always 
pay attention to these warnings.

Indicates a caution concerning operations that may lead to injury to persons or 
damage to property if not performed correctly. In order to use the machine 
safely, always pay attention to these cautions.

Indicates operational warnings and restrictions. Be certain to read these items 
to operate the machine correctly, and to avoid damage to the machine.

Indicates notes for operation or additional explanations. Reading these is 
recommended.

The following symbols, key names and unit names are used in this manual.

Unless otherwise mentioned, screenshots of the touch panel display and illustrations used in this 
manual are those taken when the Saddle Finisher-F2, and the Paper Deck-G1 are attached to the 
imageRUNNER 5000.
Note that functions that cannot be used depending on the model or options are not displayed in the 
touch panel display.

Key on control panel

Key on touch panel display

[OK] key

Start

  key

The keys which are to be operated are marked with        as shown below in this manual.

E82_US.book  Page 16  Tuesday, May 22, 2001  12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands