Canon ImageRunner 5000 Series User Manual Download Page 444

Page: 444 / 523

Self-diagnostic (Error) Display

8-33

roub

leshooting

Attach the finisher to the main unit.

The Finisher is not properly connected to the main
unit.

Connect the Finisher to the main unit properly.

Message/ Cause

Remedy

Paper is jammed in the indicated
location. Remove the jammed paper.

An original jam or paper jam has occurred,
preventing you from making prints.

Remove paper from the machine following the
guidance messages in the touch panel display.
(See “Removing Paper Jams,” on p. 8-2.)

Add toner.

There is not enough toner to print.

Add toner using the toner bottle recommended for
use on this machine.
(See “Adding Toner,” on p. 7-8.)

Remove the paper from the output tray.

Prints from the previous job remain in the output
tray.

Remove the prints from the output tray, then press
the key.

Start

E82_US.book Page 33 Tuesday, May 22, 2001 12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Search results

Summary of Contents for ImageRunner 5000 Series

Reviews:

Brands by name

Popular brands

Canon ImageRunner 5000 Series, User Manual

Search results

Summary of Contents for ImageRunner 5000 Series

Reviews:

Brands by name

Popular brands