manualshive.com logo in svg

Canon ImageRunner 5000 Series, User Manual

Share
Download
Canon ImageRunner 5000 Series User Manual Download Page 112

2

Basic Cop

ying

Two-sided Copying (Two-sided Mode)

2-43

Making One-sided Copies from Two-sided Originals (2 1-
Sided)

This feature automatically turns over two-sided originals placed in the feeder to make one-sided 
copies.

IMPORTANT

• Place the original horizontally when copying original such as LTRR/ STMTR-size original. If these origi-

nals are placed vertically, the back side of the copy will be printed upside down.

NOTE

• When copying two-sided original placed on the platen glass on one side of different sheets, set the Job 

Build mode. (

See “Copying Separately-Set Originals (Job Build),” on p. 3-45.

)

1

Place your originals in the feeder and press 
the [Two-sided Mode] key.

NOTE

• When Auto Collate is set to “On”, the Collate mode 

or the Offset Collate mode is automatically set at 
the point when you place the originals in the 
feeder. (See “Setting Automatic Collate On/ Off,” 
on p. 6-37.)

2

Press the [2 1-Sided] key.

21-Sided

Original

Copy

E82_US.book  Page 43  Tuesday, May 22, 2001  12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands