manualshive.com logo in svg

Canon ImageRunner 5000 Series, User Manual

Share
Download
Canon ImageRunner 5000 Series User Manual Download Page 50

49

Other Useful Functions

Paper Supply Indicator Function

Paper Output

This function shows the remaining amount of paper in each paper drawer when selecting the paper source 
(see “Selecting the Copy Paper Size 

(Paper Select)

,” on p. 2-9, 

“Selecting the Print Paper Size (Paper Se-

lect),” on p. 4-61

) or when paper in one paper drawer has run out during printing. There are four different 

indicators as shown below.

Display when selecting paper

Display

Remaining paper
Paper drawer is approximately 50% - 100% full.
Paper drawer is approximately 10% - 50% full.
Paper drawer is less than approximately 10% full.
Paper drawer is empty.

Display when paper has run out

Paper 
Supply 
indicator

When scanning and printing one original, and when printing on free-size paper or other available paper set in 
the stack bypass, the papers are output face up. In other cases, papers are output face down in page order. 
For details of other available papers, see “Available Paper Stock,” on p. 1-17.

E82_US.book  Page 49  Tuesday, May 22, 2001  12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands