manualshive.com logo in svg

Canon ImageRunner 5000 Series, User Manual

Share
Download
Canon ImageRunner 5000 Series User Manual Download Page 67

Placing Originals

1-16

Bef

ore 

Y

ou Star

t Using 

This Machine

1

2

Neatly place your originals face up in the origi-
nal supply tray.

IMPORTANT

• Do not add or remove originals while the originals 

are being scanned.

NOTE

• When enlarging LTR/ STMT-size originals to          

11"x17"/ LGL-size paper, place your originals hori-
zontally.

• You can place different-size originals (i.e. LTR and 

11"x17", STMT and LTRR) together in one group 
in the feeder when you set the Different Size Orig-
inals mode. (See “Feeding Different-size Origi-
nals Together in the Feeder (Different Size 
Originals),” on p. 3-43.)

• The scanned originals are output face down to the 

original output area.

When scanning is completed, remove the original 
sequentially from the original output area to avoid 
paper jams.

Original output area

E82_US.book  Page 16  Tuesday, May 22, 2001  12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands