Canon ImageRunner 5000 Series User Manual Download

Page: 58 / 523

Main Power and Control Panel Power

1-7

Bef

ore

ou Star

t Using

This Machine

The screen on the right is displayed when the
machine becomes ready to scan.

NOTE

• In this status, jobs can be reserved. (See

“Reserving a Job while the Machine is Warming
Up,” on p. 5-5.)

The machine becomes ready to print after
about 5 minutes. (at a room temperature of
68

F).

Standard mode is set in the touch panel.

IMPORTANT

• If you scan originals while the machine is warming

up, it will take longer than the time mentioned
above for the machine to become ready to print.

NOTE

• The standard copy settings are as follows:

- Copy ratio: Direct (100%)
- Paper selection: Auto Paper Selection
- Copy exposure: Auto Exposure Control
- Copy quantity: 1
- Copy function: 1

→

1-sided copy

• You can change the standard copy settings.

(See “Changing the Current Standard Settings,”
on p. 6-42.)

• You can choose which functions to display in the

Basic Features screen according to the Additional
Functions settings. (See “Selecting the Initial Func-
tion at Power ON,” on p. 6-6.)

If the message “You must insert a control card.”
appears, insert a control card. (See
“Operations before Using Copy or Mail Box
Functions,” on p. 10-3.)

E82_US.book Page 7 Tuesday, May 22, 2001 12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Search results

Summary of Contents for ImageRunner 5000 Series

Reviews:

Related manuals for ImageRunner 5000 Series

Brands by name

Popular brands

Canon ImageRunner 5000 Series, User Manual

Search results

Summary of Contents for ImageRunner 5000 Series

Reviews:

Related manuals for ImageRunner 5000 Series

Brands by name

Popular brands