manualshive.com logo in svg

Canon ImageRunner 5000 Series, User Manual

Share
Download
Canon ImageRunner 5000 Series User Manual Download Page 18

Safety Considerations

17

Safety Considerations

Installation

WARNING

• Do not install the machine near alcohol, paint 

thinner or other inflammable substances. If 
inflammable substances come into contact with 
electrical parts inside the machine, this may 
result in a fire or electrical shock.

• Do not place the following items on the machine. 

If these items come into contact with a high-volt-
age area inside the machine, this may result in a 
fire or electrical shock.
- Necklaces and other metal objects
- Cups, vases, flowerpots and other containers 

filled with water or liquids

If these items are dropped or spilled inside the 
machine, immediately turn OFF the main power 
switch and unplug the power plug from the out-
let. Then, contact your service representative.

CAUTION

• Do not install the machine in unstable locations 

such as on unsteady platforms or on inclined 
floors, or in locations which are subject to exces-
sive vibrations, as this may cause the machine to 
fall or tip over, resulting in personal injury.

• Do not install the machine in such a way that the 

ventilation ports are blocked by objects. If the 
ventilation ports are blocked, heat will build up 
inside the machine and may result in a fire.

• Do not place heavy objects on the machine, as 

they may tip over or fall resulting in personal 
injury.

E82_US.book  Page 17  Tuesday, May 22, 2001  12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands